Material: | PCD Diamond | Used For: | Laminated Wood Cutting Such As Laminated Chipboard And MDF, Melamine Wood Panels Cutting. |
---|
Laminated Chipboard MDF Wood Cutting Diamond PCD Helical Compression Router Bits
Model: PCD Router Bits Z=2+2
This router bit is helical compression diamond pcd router bit, specially for laminated wood cutting, such as laminated chipboard and MDF, melamine wood panels cutting. Diamond bits last for long time bits, it is great for large quantities products producing, With diamond, the initial costs are greater, but after 1-2 services is where the pricing lowers.
This is a quality PCD tool for CNC nesting. With 2+2 shear cut design feature, this durable cutter ensures a clean finish on both top and bottom surfaces of your work piece. Designed to perform at higher feed rates. Also includes plunge cut facility.
PCD Helical Compression Router Bits Sizes:
Item No. | CED(mm) | CEL(mm) | SHK(mm) | OVL(mm) | Teeth No. Z | Teeth Height: H |
D010 | 18 | 28 | 20 | 85 | 2+2 | 2.5 |
D020 | 18 | 35 | 20 | 95 | 2+2 | 2.5 |
D030 | 20 | 28 | 20 | 100 | 2+2 | 2.5 |
D040 | 20 | 35 | 20 | 110 | 2+2 | 2.5 |
D050 | 20 | 43 | 20 | 120 | 2+2 | 2.5 |
D060 | 20 | 28 | 25 | 100 | 2+2 | 2.5 |
D070 | 20 | 35 | 25 | 110 | 2+2 | 2.5 |
D080 | 20 | 43 | 25 | 120 | 2+2 | 2.5 |
D090 | 25 | 28 | 25 | 100 | 2+2 | 2.5 |
D100 | 25 | 35 | 25 | 110 | 2+2 | 2.5 |
D110 | 25 | 43 | 25 | 120 | 2+2 | 2.5 |
PCD Router Tooling Benefits:
1, Harder cutting edge provides higher resistance to wear
2, Cut thousands of feet more than carbide without changing tool, saving setup time
3, Optimized machine tool efficiency
4, Quality of finish is often significantly improved
5, Compression style wings help eliminate chipping and delamination.
Wood Cutting Diamond Bits Applications:
1, Cutter used on any type of panel, wood and derivatives.
2, Excellent finishing cut on materials with: melamine, paper very thin, laminate material subject to chipping, film coating, solid wood long-fiber, etc.
PCD Nesting Tool Features:
1. Suitable for profiling, rebating, grooving and aperture forming
2. Use on MDF, HDF, hard natural timber, raw, veneered and laminated particle board, plywood, hardboard and solid laminates
3. Use in fixed head, NC or CNC routers only.
4. Segmented tip (Compression cut style) with Diamond plunge tip as standard.
5. Upcut and downcut shear to prevent edge breakout on veneers and laminates.
6. Can be re-sharpened for extended life.
7. 24000 RPM recommended speed with approximate feed rate of 5 – 15 metres per minute.
RicoCNC supplies a range of cnc tools, cnc machines, and cnc spares, welcome to your inquiry.