Material: | Solid Carbide | Application: | Signs Making CNC Router Machine |
---|---|---|---|
Type: | General Type 1 Flute End Mill Bits |
Single Edge 'O' Flute Down Cut Spiral End Mills for Honeycomb Panel Cutting
The single flute down cut spiral router bits designed for maximise smooth finish with downward cut for enhanced material holding, prevent workpiece lifting during cutting. The downward spiral is especially useful to create downward chip flow and hold the part to the table during cutting. The special geometery is designed to give best edge finish on hard acrylic plastics.
Also the down-cut spiral bit uses the higher quality micrograin solid carbide, resulting in clean cuts, superior surface finish and a longer tool life.
Spiral down-cut router bits work with cnc routers, widely used for acrylic, plastic honeycomb panel cutting, wood, MDF, plywood, PVC, etc.
Single Edge 'O' Flute Downcut End Mills Sizes:
Item No. | CED(mm) | CEL(mm) | SHK(mm) | OVL(mm) |
1LXD3.06 | 3.175 | 6 | 3.175 | 40 |
1LXD3.08 | 3.175 | 8 | 3.175 | 40 |
1LXD3.10 | 3.175 | 10 | 3.175 | 40 |
1LXD3.12 | 3.175 | 12 | 3.175 | 40 |
1LXD3.15 | 3.175 | 15 | 3.175 | 40 |
1LXD3.17 | 3.175 | 17 | 3.175 | 45 |
1LXD3.22 | 3.175 | 22 | 3.175 | 50 |
1LXD408 | 4 | 8 | 4 | 45 |
1LXD412 | 4 | 12 | 4 | 45 |
1LXD417 | 4 | 17 | 4 | 50 |
1LXD422 | 4 | 22 | 4 | 50 |
1LXD512 | 5 | 12 | 5 | 50 |
1LXD517 | 5 | 17 | 5 | 50 |
1LXD522 | 5 | 22 | 5 | 55 |
1LXD612 | 6 | 12 | 6 | 45 |
1LXD617 | 6 | 17 | 6 | 50 |
1LXD622 | 6 | 22 | 6 | 55 |
1LXD820 | 8 | 20 | 8 | 75 |
1LXD825 | 8 | 25 | 8 | 80 |
1LXD835 | 8 | 35 | 8 | 90 |
1LXD1025 | 10 | 25 | 10 | 80 |
1LXD1035 | 10 | 35 | 10 | 90 |
1LXD1045 | 10 | 45 | 10 | 100 |
1LXD1235 | 12 | 35 | 12 | 90 |
1LXD1245 | 12 | 45 | 12 | 100 |
1LXD1255 | 12 | 55 | 12 | 110 |
RicoCNC specialize in CNC cutter bits, solid carbide spiral router bits, plunge bits, and other industrial cutting tools such as big foam mill bits, PCD diamond bits, single flute upcut, downcut spiral, compression spiral bits, double flutes, tripple flutes bits, four flutes bits, straight flute bits, etc.
Welcome your inquiry.